Camera not detected
If a message indicates that the camera is not detected, we recommend that you follow these steps one by one to resolve the problem:
Lü 2nd generation
1. Access the "status" section in Lu setting, and select try again.
2. Restart the system.
4. Reset the breaker:
1. Turn off the computer and the projector
2. Turn off the breaker for 1 minute and turn it back on.
3. Turn the projector on again and check if the camera status
Lü 1st Generation
1. Access the "status" section in Lu setting, and select try again.
2. Restart the system.
3. Reset the breaker:
1. Turn off the computer and the projector
2. Turn off the breaker for 1 minute and turn it back on.
3. Turn the projector on again and check if the camera status
Möbil
1. Access the "status" section in Lu setting, and select try again.
2. Restart the system.
4. Turn off the projector and the computer, then disconnect the power cable for 30 seconds.
Related Articles
How to calibrate the camera
Calibration guide for accurate ball detection Calibration is necessary when the detection of the ball on the wall is inaccurate or when there are false detections. This usually occurs when the camera is hit by a ball. Even a slight movement of the ...Lü 1st generation - Change the image ratio
If any part of the screen does not display correctly in the projection, the aspect ratio may have been accidentally changed. To change the image ratio and thus have a full screen, press the Aspect button using the projector remote control and choose ...Stuck on Dell Splash Screen
If the computer is stuck on the Dell splash screen, you need to restart it. You have two options to do this: Option 1: Restarting from the Computer 1. Using a ladder, open the heart's cover to access the computer located inside. Once the cover is ...My Lü app is not working properly
If your Lü system is behaving differently than usual, the first troubleshooting step you can try is to restart the computer. This should reset the Lü software and potentially resolve the issue. Should the problem persist, please don't hesitate to ...Correcting Image Shape with Quick Corner
You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. Note: To provide the best possible image quality, adjust the projector's position to correct the image shape. If ...