Lighting not initialized

Lighting not initialized

Here are some possible solutions to troubleshoot the message "Lighting not initialized"

 

●   Check that the computer is properly connected to the internet. You can press "win" using the keyboard to open the windows taskbar and access the wifi settings.



●   Restart the Lü application by pressing Alt+F4 to close the Lu application and, then double-click on the Lu shortcut.



●   Restart the system.
●   Check for Windows updates



●   Turn off the computer and the projector, and then turn off the circuit breakers for at least 15 seconds before turning them back on.
●   If you have access to a scissor lift, disconnect and then reconnect the USB cable from the Enttec USB converter.
●   Connect this same cable to another USB port on the computer.
●   Turn off the computer and the projector, and then turn off the circuit breakers for at least 15 seconds before turning them back on.
●   If the problem persists, contact Lü Technical Support at:

Lü - Interactive Playground

support@play-lu.com

1-855-781-0797


    • Related Articles

    • How to turn on and off the lights

      When the Lü app wakes up, the lights will turn on by themselves. When you enter an app, the lights will automatically adjust and change color based on the selected game. When you are finished using Lü, you can manually turn off the lights or wait 30 ...
    • Best Practices

      1. To start using your Lü, you must turn on the projector and the keyboard first. Then, wake up your Lü by pressing any key on the keyboard and you'll be able to start using it. 2. If there is something wrong with the system, try restarting the ...
    • How to setup the mobil unit

      To learn how to set up the mobile unit, please watch this video : https://www.youtube.com/watch?v=liMPZrsbCOI You can also check the user guide attached to this article or the cable connections diagram below. If you need assistance, please contact ...
    • Turn on and off your Lü

      To turn on your Lü :   ●       Using the Epson remote controller, press ON to turn on the projector.                OR    ●       Turn on the portable keyboard. ●       Turn off the gymnasium lights (optional). ●       Wake up the application by ...
    • Shortcuts for Lü

                    Keyboard controller Laser Projector controller Lamp projector controller            Shortcut in-app Home page: F1 turn on and off the lights                                                                           Galactic: Press N to ...